Pair of short black reverse cone stainless steel performance silencers from Mistral, the short reverse cone design compliments the pared back styling of the V9 models. Supplied with DB killer, gaskets and shorter black heat shields these are a more durable, stylish, lighter and better sounding than the original silencers.

Also available in satin or polished finish.

Euro 5 compliant
Useful increase in power and torque compared to the original silencers
5kg weight saving!
All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. Centre stands are compatible with these silencers and no special bracket is required.
No remap required No changes to the ECU map are required

Release the music in your Guzzi!

 1 in stock

Special DB-killer kit with eagle design to rear. The Guzzi eagle compliments the motif on the headlamp and fuel tank and will make your V100 stand out from the crowd.

• dB-Killer compliant with EURO5 regulations=
• Subtle eagle logo
• Supplied with special tool to release anti-tamper screw
• Supplied with fitting screw

 1 in stock

Black stainless steel exhaust cover for the exhaust link pipe and CAT. Fits easily to the standard exhaust system to improve the styling of the V100. This brushed stainless finish cover also helps shield your feet from the heat of the CAT. This shorter cover is compatible with a centre stand.

A quality accessory hand made in Italy for your V100

 1 in stock

The Mistral V-Twin boost is an effective and cost efficient way to cure the fuelling problems common to all modern fuel injected Ducati's. Modern Ducati's run particularly lean and will benefit particularly from the installation of a V-Twin Boost.
Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.

The V-Twin boost features a unique technology to provide your bike with a controlled fuel enrichment.
Make your bike run as it should have done from the factory!

• Quick and easy installation
• Resistant to atmospheric agents and vibrations
• Optimized by Mistral for your bike
• Best response to the opening of the throttle
• Better torque at low-medium range
• Reduction of the on/off effect
• Correct air/fuel ratio in all conditions with real-time modification

 1 in stock

Also fits 748 2000 – 2003, 748S 2001 – 2003, 748R 2001 – 2003, 749 2003 – 2007, 749 DARK 2003 – 2007, 749R 2003 – 2007, 749S 2003 – 2007, 996 Biposto 1998 – 2001, 996 S 1998 – 2001, 999 2002 – 2006, 999 R 2002 – 2006, 999 S 2003 – 2006, 848 2007 – 2013, 848 EVO 2010 – 2013, 848 EVO Corse SE 2010 – 2013, 1098 2006 – 2009, 1098 S 2006 – 2012, 1098 R 2007 – 2011, 1098 R Bayliss 2009 – 2011, 1198 2008 – 2012, 1198 S 2008 – 2012, 1198 S Corse SE 2008 – 2012, 1198 R Corse SE 2009 – 2012, 1198 SP 2010 – 2012, 1199 Panigale R 2013, Hypermotard 796 2009 – 2012, Hypermotard 1100 EVO 2010 – 2012, Hypermotard 1100 EVO SP 2010 – 2012, Hypermotard 821 2013 – 2015, Hypermotard 821 SP 2013 – 2015, Hyperstrada 821 2013 – 2015, Hypermotard 939 2016 –, Hypermotard 939 SP 2016 –, Hyperstrada 939 2016 –, Scrambler 800 (tutte le varianti), Street Fighter 848 2011 – 2015, Street Fighter 1098 2008 – 2014, Street Fighter 1098 S 2008 – 2014, MH900 2000 – 2002, MH900 Evoluzione 2001 – 2002, Monster 900 IE 1999 – 2002, Monster 696 2008 – 2013, Monster 696+ 2007 – 2014, Monster 696 ABS 2009 – 2014, Monster 796 2010 – 2013, Monster 796 ABS 2010 – 2014, Monster 1100 2008 – 2011, Monster 1100 S 2008 – 2011, Monster 1100 EVO 2010 – 2013, Monster 821 2014 –, Monster 821 Dark 2014 – 2016, Monster 821 Stripe 2014 –, Monster 797 2017 –, Monster 797 + 2017 –, Monster 1200 2013 –, Monster 1200 S 2013 –, Monster 1200 S Stripe 2013 –, Monster 1200 R 2016 –, Multistrada 1000 DS 2003 – 2006, Multistrada 1000 S DS 2004 – 2006, Multistrada 1100 2006 – 2009, Multistrada 1100 S 2006 – 2009, Multistrada 620 2005 – 2007, Multistrada 620 Dark SD 2005 – 2007, Multistrada 1200 2015 – (motore DVT), Multistrada 1200 S 2015 – (motore DVT), Multistrada 1200 S D-Air 2015 – (motore DVT), Multistrada 1200 Pikes Peak 2015 – (motore DVT), Multistrada 1200 Enduro 2017 – (motore DVT), Multistrada 950 2017 –, SuperSport 750 i.e. 1999 – 2003, SuperSport 750 Sport i.e. 1999 – 2003, SuperSport 900 i.e. 1998 – 2003, SuperSport 900 Sport i.e. 1998 – 2003 SuperSport 939 2017 –, SuperSport 939 S 2017 –, ST2 1997 – 2003, ST3 2003 – 2007, ST3 S ABS 2003 – 2007, ST4 1999 – 2003, ST4S 2001 – 2005, ST4S ABS 2003 – 2005

HIgh performance aluminium velocity stack for airbox to throttle body union. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM

This manifold is suitable for EURO 4 and 5 models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA10434.

Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.

 1 in stock

Matte black finish Avion performance silencer. GT silencer is compatible with factory panniers. Full deep sound enhances the V-twin engine note and you'll appreciate the extra 2hp that is released. It's also a full kilo lighter than the stock part. Distinctive Avion styling and shorter length compliments the V100 Mandello. Includes carbon fibre heat shield.
Mistral focused the development on the technical details that characterize this exhaust, performing something of unique. Thanks to a different internal construction Mistral saved about 1 kilogram compared to the stock silencer and improved performance, not that the bike was lacking but more fluidity and torque is always a good thing to have. The final endcap, totally milled from a block of aluminum, ensure an unique and valuable look that combined with the carbon fibre heat shield match perfectly the sportly character of the bike.

• CNC machined end cap made by Anticorodal
• 1 kg lighter than stock
• 10% more torque off tickover
• Full and deep sound
• Specific heat shield and bracket included
• dB-Killer compliant with EURO5 regulations
• Compatible with the standard factory hard panniers and centre stand
• +2 HP e + 1 Nm (+ 3 HP increase If combined with Racing Air Filter SIA09776 )
• Laser engraved MISTRAL logo

 1 in stock

Exhaust stud, see ENA96043 for less expensive alternative

See ENA31880 for stud nut

 This part is available by special order, request a quote

 96506042 GU96506042 96 50 60 42
 9650 6042 9650.6042 96.50.60.42

Stainless steel exhaust cover

 Sorry, this part is no longer available.

 06121900 GU06121900 06 12 19 00
 0612 1900 0612.1900 06.12.19.00

Chrome Lafranconi 'stacked barrels' type silencer as originally fitted to military and police models

 This part is available by special order, request a quote

Pair of polished stainless steel exhaust reverse cone silencers with DBKillers. These quality silencers are significantly lighter than stock and improve sound, BHP and torque. They are much smaller (100mm OD) than the OE silencers and compliment the styling of the V11 Sport

Handmade to order in Italy
Supplied with brackets and removable baffles. Priced per pair, for maximum performance gains combine with Mistral crossover EXA20011
Also available in aluminium, carbon and titanium variants - call or email for prices

Release the music in your Guzzi!

Not what you're looking for? We can supply a range of silencer shapes and finishes for your model - contact us with your requirements and we'll advise on availability and price

 This part is available by special order, request a quote